Current Category
Tools, Joints, Disks > Bulk Nuts & Bolts

	Cotter Pins 25x1.5 - (200)	QTY:
	Very good for small to medium bears but not so reliable on large bears. We suggest you use one of our cotterpin turners to tighten them, they make life much easier. 1.5mm pins are used with 6mm - 20mm disks, make sure you get the disks with the 1.5mm hole. With the 2.5mm pins we suggest you use our special cotter pin washers

	Cotter Pins 32x2.5 - (200)	QTY:
	Very good for small to medium bears but not so reliable on large bears. We suggest you use one of our cotterpin turners to tighten them, they make life much easier. 1.5mm pins are used with 6mm - 20mm disks, make sure you get the disks with the 1.5mm hole. With the 2.5mm pins we suggest you use our special cotter pin washers

	Cotter Pins 45x2.5 - (200)	QTY:
	Very good for small to medium bears but not so reliable on large bears. We suggest you use one of our cotterpin turners to tighten them, they make life much easier. 1.5mm pins are used with 6mm - 20mm disks, make sure you get the disks with the 1.5mm hole. With the 2.5mm pins we suggest you use our special cotter pin washers

	T Pins 20x1.6 - (50)	QTY:
	T pins are used in the same way as cotter pins. Because of their T shaped head they are less likely to pull through the disk

	T Pins 28x2.5 - (50)	QTY:
	T pins are used in the same way as cotter pins. Because of their T shaped head they are less likely to pull through the disk

	T Pins 32.3.2 - (50)	QTY:
	T pins are used in the same way as cotter pins. Because of their T shaped head they are less likely to pull through the disk

	Screws 3mmx 12mm - (200)	QTY:
	3mm screws are for disk size 13mm - 20mm. Screws don't come with nuts etc, see below for matching nuts & washers

	Screws 3mmx16mm - (200)	QTY:
	3mm screws are for disk size 13mm - 20mm. Screws don't come with nuts etc, see below for matching nuts & washers

	Screws 3mmx20mm - (200)	QTY:
	3mm screws are for disk size 13mm - 20mm. Screws don't come with nuts etc, see below for matching nuts & washers

	Screws 5mmx20mm - (200)	QTY:
	5mm screws are for disk size 25mm - 65mm. Screws don't come with nuts etc, see below for matching nuts & washers.

	Screws 5mmx25mm - (200)	QTY:
	5mm screws are for disk size 25mm - 65mm. Screws don't come with nuts etc, see below for matching nuts & washers.

	Screws 6mmx25mm - (200)	QTY:
	6mm screws are for disk size 75mm - 100mm. Screws don't come with nuts etc, see below for matching nuts & washers.

	Washers 3mm - (200)	QTY:
	Washer are recommend as they help to protect the wooden disks when they are being tightened and during movement. They also stop cotter pins pulling through the disk.

	Washers 5mm - (200)	QTY:
	Washer are recommend as they help to protect the wooden disks when they are being tightened and during movement. They also stop cotter pins pulling through the disk.

	Washers 6mm - (200)	QTY:
	Washer are recommend as they help to protect the wooden disks when they are being tightened and during movement. They also stop cotter pins pulling through the disk.

	Plain Nuts 3mm - (200)	QTY:
	Nuts are available in lock and plain, 3mm nuts fit 3mm screws etc.  Lock nuts have a nylon insert to stop them from coming loose, highly recommended for reliable joints.

	Lock Nuts 3mm - (200)	QTY:
	Nuts are available in lock and plain, 3mm nuts fit 3mm screws etc.  Lock nuts have a nylon insert to stop them from coming loose, highly recommended for reliable joints.

	Plain Nuts 5mm - (200)	QTY:
	Nuts are available in lock and plain, 5mm nuts fit 5mm screws etc.  Lock nuts have a nylon insert to stop them from coming loose, highly recommended for reliable joints.

	Lock Nuts 5mm - (200)	QTY:
	Nuts are available in lock and plain, 5mm nuts fit 5mm screws etc.  Lock nuts have a nylon insert to stop them from coming loose, highly recommended for reliable joints.

	Plain Nuts 6mm - (200)	QTY:
	Nuts are available in lock and plain, 6mm nuts fit 6mm screws etc.  Lock nuts have a nylon insert to stop them from coming loose, highly recommended for reliable joints.